Fostex PD-6 Operation Manual page 12

PD-6 DVD Location Recorder
10
Chapter 7: Setup mode
This chapter describes details about menus in the Setup mode. Using Setup
mode menus, you can set preferences, etc. of the PD-6. The following menus are
available in the Setup mode.
<Note>
The Setup mode menu may change when the PD-6 software is updated.
Real Time Clock menu
Digital Out menu
Digital In menu
Skip mode menu
Diagnoses menu
Reference level menu
Peak hold time menu
Tone rec mode menu
Auto cue menu
Pause time menu
Error tone menu
BATT warning menu
Speaker mute menu
Limiter parameter menu
Default File name menu
Default track name menu
Next event menu
USB keyboard menu
Pre rec time menu
User setup save menu
User setup load menu
Version menu
Chapter 8: Utility mode
This chapter describes the Utility mode, in which you can make settings related
with DVD-RAM disks to be used with the PD-6, as well as format a disk. The
following menus are available in the Utility mode.
<Note>
The Utility mode menu may change when the PD-6 software is updated.
You can check or edit the internal real-time clock.
You can select the digital output signal format between AES/EBU and
SPDIF.
You can select the input channel sources between digital and analog.
You can select the function of the [SKIP/CURSOR] key.
You can select whether logging errors during recording to the diagnoses
file or not.
You can select the PD-6 reference input level.
You can set the peak hold time of the level meters.
You can set the recording duration and mode of the slate tone.
You can select whether automatically recording a cue point or not at
the record start position.
You can set the pause cancel time.
You can select on or off of the error tone.
You can set the threshold of the battery power voltage for generating
the error tone.
You can select whether muting the monitor speaker or not except
during recording.
You can set the limiter parameters.
You can select the name form of an audio file when it is created between
date information base and scene/take number information base.
You can specify the default track name of audio files.
You can set the event number of audio files.
You can select the USB keyboard type to be connected between US
and JAPAN.
You can set the pre-record time of audio pooled in the buffer.
You can save the setup data to the user box.
You can load the setup data from the user box.
You can check the PD-6 software version.