Ipmi (X9Sri-F, X9Sri-3F, X9Sre-F, X9Sre-3F Only); System Event Log; When Sel Full; Log Efi Status Codes - Supermicro Supero X9SRi User Manual

4-5

IPMI (X9SRi-F, X9SRi-3F, X9SRE-F, X9SRE-3F Only)

Intelligent Platform Management Interface (IPMI) is a set of common interfaces that
IT administrators can use to monitor system health and to manage the system as a
whole. For more information on the IPMI specifications, please visit Intel's website
at www.intel.com.

System Event Log


This feature is used to change the Sytem Event Log (SEL) configuration.
SEL Components - Change this item to enable or disable all features of System
Event Logging. The options are Enabled and Disabled. When Enabled, the
following can be configured:
Erase SEL - This option erases all logged SEL events. The options are No, Yes,
On Next reset and Yes, On Every reset.

When SEL Full

This option automatically clears the System Event Log memory of all messages
when it is full. The options are Do Nothing and Erase Immediately.

Log EFI Status Codes

This option enables or disables the logging of Extensible Firmware Interface
(EFI) status codes. The options are Enabled and Disabled.

BMC Network Configuration


Set this feature to configure the IPMI LAN adapter with a network address.
4-19
Chapter 4: AMI BIOS