Table of Contents
Advertisement
H8DA8/H8DAE/H8DAR-8/H8DAR-i User's Manual
CPU0: CPU1 HT Link1 Width
The HT link will run at the width specifi ed in this setting. Options are Auto, 2 bit,
4 bit, 8 bit and 16 bit.
CPU0: PCI-X0 HT Link1 Speed
The HT link will run at the speed specifi ed in this setting if it is slower than or equal
to the system clock and if the board is capable. Options are Auto, 200 MHz, 400
MHz and 600 MHz.
CPU0: PCI-X0 HT Link1 Width
The HT link will run at the width specifi ed in this setting. Options are Auto, 2 bit,
4 bit, 8 bit and 16 bit.
MPS Confi guration
MPS Revision
This setting allows the user to select the MPS revision level. The options are 1.1
and 1.4.
Remote Access Confi guration
Remote Access
Use this setting to Enable or Disable remote access. If Enabled is selected, you
can select a Remote Access type.
USB Confi guration
This screen will display the module version and all USB enabled devices.
Legacy USB Support
Select "Enabled" to enable the support for USB Legacy. Disable Legacy support
if there are no USB devices installed in the system. The options are Disabled,
Enabled and Auto.
4-8
Advertisement
Table of Contents
