Supermicro Supero H8DAR-i User Manual page 54

H8DA8/H8DAE/H8DAR-8/H8DAR-i User's Manual
Parallel Port Address
This option specifi es the I/O address used by the parallel port. Select Disabled to
prevent the parallel port from accessing any system resources. When the value of
this option is set to Disabled, the printer port becomes unavailable. Select 378 to
allow the parallel port to use 378 as its I/O port address. The majority of parallel
ports on computer systems use IRQ7 and I/O Port 378H as the standard setting.
Select 278 to allow the parallel port to use 278 as its I/O port address. Select 3BC
to allow the parallel port to use 3BC as its I/O port address.
Parallel Port Mode
Specify the parallel port mode. The options are Normal, Bi-directional, EPP
and ECP.
Parallel Port IRQ
Select the IRQ (interrupt request) for the parallel port. The options are IRQ5
and IRQ7.
ACPI Confi guration
ACPI Aware OS
Use this setting to tell BIOS if the operating system recognizes ACPI functions.
The options are Yes and No.
Advanced ACPI Confi guration
ACPI 2.0 Support
Select "Yes" if your system supports ACPI 2.0, which will add additional tables
as per ACPI 2.0 specifi cations. Options are Yes and No.
ACPI APIC Support
Select "Enabled" to allow the ACPI APIC Table Pointer to be included in the
RSDT pointer list. The options are Enabled and Disabled.
ACPI SRAT Table
This setting allows you to enable or disable the building of an ACPI SRAT table.
Options are Enabled and Disabled.
4-6