Unit Reset; Figure 8-4. Unit Reset Page; Table 8-3. Unit Reset Page Controls - Supermicro Web-based Management Utility User Manual

Web-based Management Utility
8-4

Unit Reset

Clicking the U
NIT
page (Figure 8-4), which allows you to reset USB and Device components. The controls
for this page are detailed in
Item Name
Reset
1 Keyboard/
Mouse (USB)
2 Reset USB
Reset Video
3
Engine
4 Reset Device
Reset Other
5
Device
R option in the M
ESET
Table 8-3.

Figure 8-4. Unit Reset Page

Table 8-3. Unit Reset Page Controls

Description
Click the R icon to reset the Keyboard/Mouse (USB) module.
ESET
Click the R icon to reset the USB module.
ESET
Click the R icon to reset the Video Engine module.
ESET
Click the R icon to cold reset the utility's firmware.
ESET
If your Blade system has a secondary CMM, then the Reset Other Device
section will be shown. As above with the Reset Device icon, click this icon
to cold reset the utilities firmware.
If a primary CMM module is rebooted or removed, then the secondary
CMM will automatically become the primary CMM, but the IP address will
be different.
submenu brings up the U
AINTENANCE
1
2
3
4
5
8-4
R
NIT ESET