Event Log; Figure 7-4. Device Settings Event Log Page; Table 7-4. Device Settings Event Log Page Controls - Supermicro Web-based Management Utility User Manual

Web-based Management Utility
7-4

Event Log

Selecting the E
D S
EVICE ETTINGS
and assignments. Controls for this page are shown and detailed in
• Event Log Targets: This section allows you to manually set the event log targets
and settings.
• Event Log Assignments: This window allows you to specify the types and the
destination for the event logging.

Table 7-4. Device Settings Event Log Page Controls

Item Name
List Logging
1
Enabled
Entries Shown
2
Per Page
Clear Internal
3
Log
L option from the D
VENT OG
E L page
VENT OG

Figure 7-4. Device Settings Event Log Page

Description
Check this box to activate the event-logging list. To show the event log list,
click on E
VENT
NOTE: The maximum number of log list entries is 1,000 events. Every
entry that exceeds this limit will automatically override the oldest one in the
list. If the reset button is pressed, all logging information will be saved,
however, all logging data will be lost if a hard reset is performed or the
system loses power.
Enter the number of entries you want to display on a page.
Click this icon to clear the internal event log from memory.
S
EVICE ETTINGS
(Figure 7-4). Use this page to set event log targets
1
2
3
4
5
7
8
9
10
12
13
15
16 17
L under S H
OG YSTEM EALTH
7-8
submenu brings up the
Table 7-4.
6
11
14
.