Web-based Management Utility
3-3
Drive Redirection
The D
R
RIVE
EDIRECTION
redirection settings. The D
(Table
3-3) are shown below.
Item
Name
Active Image
1
(Drive1)
Active Image
2
(Drive2)
Drive
3
Redirection
Disable Drive
4
Redirection
Force Read
5
Only
Connections
6
Apply
Reset to
7
Defaults
option in the V
R
RIVE
EDIRECTIONS
Figure 3-3. Drive Redirections Page
Table 3-3. Drive Redirection Page Controls
Description
This box displays if any virtual device/image has been connected to the
remote host.
This box displays if any virtual device/image has been connected to the
remote host.
Use this to configure D
Check the box to disable Drive Redirection. Once this function is disabled,
local drives will not be accessible for other remote systems users.
Check this box to allow the data stored in local drives to be read by a
remote system, but not overwritten (for data integrity and system security
purposes).
After configuring your settings, click "Apply" to initiate drive redirection with
the parameters you've set.
You can also key in your own setting values and re-set these values as
"default" by clicking on this icon to reset the defaults.
M
submenu allows you to configure
IRTUAL
EDIA
page
(Figure
1
2
3
4
6
7
R
settings.
RIVE
EDIRECTION
3-4
3-3) and its controls
5