Table 2-5. Cmm Status Page Controls - Supermicro Web-based Management Utility User Manual

Web-based Management Utility
Item Name
1 CMM Status
CMM Operation
2
Mode
User Specified
3
Time
Synchronize
4 with NTP
Server
5 UTC Offset
Primary/
6 Secondary
Time Server
7 Apply
Reset to
8
Defaults
9 Backup
10 Restore

Table 2-5. CMM Status Page Controls

Description
Use this section to view the status of CMM modules installed in your
system.
Use this control to specify either Enterprise Blade Mode or Office Blade
Mode for your CMM Operation. Choose Enterprise Blade Mode for high
performance operation or Office Blade Mode for quiet operation in a low
noise office environment.
In Enterprise Blade Mode the fan speed and performance is higher. In
Office Blade Mode the fan speed is lower, generating less noise.
This option allows the user to enter the time values for the SIMCM internal
real-time clock.
Click this to synchronize the CMM's real-time clock with the NTP (Network
Time Protocol) server.
This pull-down menu allows you to offset the UTC Timer.
Enter the IP Address for the primary or secondary NTP server that you
want to synchronize with the CMM internal real-time clock.
NOTE: Daylight savings time cannot be automatically adjusted. Please
manually set up the UTC offset twice a year to compensate for daylight
savings time.
Click this icon to apply changes you have made in this page.
Click this icon to restore default status to the controls in this page.
Click to download and save the CMM configuration.
Click to select and then restore the CMM configuration.
2-8