Table of Contents
Advertisement
Web-based Management Utility
7-3
Security
Selecting the S
S
page
ECURITY
for this page are shown and detailed in
•
Encryption Settings: This field allows you to configure encryption settings.
•
IP Access Control: This section allows you to configure the IP Access Control
settings listed below.
•
User Blocking: This field allows you to set the user blocking conditions.
Item
Name
Force HTTPS
1
for Web Access
2
KVM Encryption
Enable IP
3
Access Control
option from the D
ECURITY
(Figure
7-3). Use this page to configure the Security settings. Controls
Figure 7-3. Security Page
5
Table 7-3. Security Page Controls
Description
Check this box to enable Force HTTPS for Web Access. If enabled, you
will need to use an HTTPS connection to access the web management
utility.
This option allows you to configure the encryption of the RFB protocol.
RFB is used by the remote host to transmit video data displayed in the host
monitor to the local administrator machine and to transmit keyboard and
mouse data from the local administrator machine back to the remote host.
If set to O
, no encryption will be used. If set to T
FF
the remote host) will attempt to make an encrypted connection. In this
case, when a connection cannot be established, an unencrypted
connection will be used. If set to F
connection. In this case, an error will be reported if no connection is made.
Check this box to enable IP Access Control. This function is used to limit
user access to the network by identifying them by their IP address
(available to the LAN interface only.)
S
EVICE
ETTINGS
Table
7-3.
1
2
3
4
6
8
9
10
12
13
14
15
ORCE
7-6
submenu brings up the
7
11
, the applet (JVM of
RY
, the applet will make an encrypted
Advertisement
Table of Contents
