Table of Contents
Advertisement
Web-based Management Utility
7-2
Dynamic DNS
Selecting the D
D
DNS S
YNAMIC
settings. Controls for this page are shown and detailed in
Item
Name
Enable
1
Dynamic DNS
Dynamic DNS
2
Server Link
3
DNS System
4
Hostname
5
Username
6
Password
Check time
7
(HH:MM)
8
Check Interval
DNS option from the D
YNAMIC
page
(Figure
ETTINGS
Figure 7-2. Dynamic DNS Settings Page
Table 7-2. Dynamic DNS Settings Page Controls
Description
Check this box to enable Dynamic DNS.
Click the www.dyndns.org: link to access the DynDNS web site. This is the
server name where the DDNS Service is registered.
If Dynamic DNS is enabled, you can select either C
the pull-down menu. Select C
server. Select D
server.
Enter the name you want to use for the remote host server.
Enter the username for the remote host user.
Enter the password for the remote host user.
Enter the time the SIMCM card first registers with the DNS server in the
HH:MM format (such as: 07:25 or 19:30).
Enter the time interval for the IPMI to report to the Dynamic DNS again.
S
EVICE
ETTINGS
7-2). Use this page to configure Dynamic DNS
1
2
3
4
5
7
8
9
10
11
to use your own system as the DNS
USTOM
to use the pre-configured Dynamic DNS as your
YNAMIC
7-4
submenu brings up the
Table
7-2.
6
or D
USTOM
YNAMIC
from
Advertisement
Table of Contents
