Figure 2-1. Blade Status Page; Table 2-1. Blade Status Page Controls - Supermicro Web-based Management Utility User Manual

Web-based Management Utility
Item Name
1 Power On
2 Power Off
3 Reset
4 UID On
5 UID Off
6 KVM
Graceful
7
Shutdown
CPU/Pwr
8
Usage
Refresh Blade
9
Status

Figure 2-1. Blade Status Page

1
4
7

Table 2-1. Blade Status Page Controls

Description
Click to apply power to (power up) a selected blade module.
Click to remove power from a selected blade module.
Click this icon to reset a selected blade module.
Click this icon to turn on the UID LED of a selected blade module.
Click this icon to turn off the UID LED of a selected blade module.
Click on this icon to initiate Remote KVM over IP and remotely operate a
selected blade module.
Click to send a selected blade module into an S5 sleep state.
Click this icon if you want to set a selected blade unit's CPU power usage
percentage.
Click to refresh the page and update the status of the blade modules
shown.
2 3
5 6
8
9
2-2