Connecting To The Fortiswitch-5003A Cli Using Ssh - Fortinet 5003A Fabric And Base Backplane Communications Manual

FortiSwitch-5003A CLI reference

Connecting to the FortiSwitch-5003A CLI using SSH

Secure Shell (SSH) provides strong secure authentication and secure communications to the
FortiSwitch-5003A CLI from your internal network or the internet. Once the FortiSwitch-5003A board is
configured to accept SSH connections, you can run an SSH client on your management computer and
use this client to connect to the FortiSwitch-5003A CLI.
To connect to the CLI using SSH
1 Install and start an SSH client.
2 Connect to the FortiSwitch-5003A mgmt interface.
3 Type a valid administrator name and press Enter.
4 Type the password for this administrator and press Enter.
A prompt similar to the following appears:
FS5A033E080001~#
You have connected to the FortiSwitch-5003A CLI, and you can enter CLI commands.
FortiSwitch-5003A and 5003 Fabric and Base Backplane Communications Guide
01-30000-85717-20081205
Connecting to the CLI
91