Restore - Fortinet 5003A Fabric And Base Backplane Communications Manual

FortiSwitch-5003A CLI reference

restore

Use this command to restore the FortiSwitch-5003A configuration from a file on a TFTP server or
change the FortiSwitch-5003A firmware.
Syntax
execute restore
execute restore
execute restore
Variables
<filename> <tftp_ipv4>
config
<filename>
all-config
<tftp_ipv4>
tftp <filename>
image
<tftp_ipv4>
Example
This example shows how to upload a configuration file from a TFTP server and restart the system with
this configuration. The name of the configuration file on the TFTP server is backupconfig. The IP
address of the TFTP server is 192.168.1.23.
execute restore config backupconfig 192.168.1.23
Related topics
• execute backup
FortiSwitch-5003A and 5003 Fabric and Base Backplane Communications Guide
01-30000-85717-20081205
config <filename> <tftp_ipv4>
config <filename> <tftp_ipv4>
image tftp <filename> <tftp_ipv4>
Description
Restore the system configuration from a file on a TFTP server.
The new configuration replaces the existing configuration.
Restore the system configuration from a file on a TFTP server
that was saved using the execute backup all-config
command. The new configuration replaces the existing
configuration.
Upload a firmware image from a TFTP server to the
FortiSwitch-5003A board. The system reboots, loading the new
firmware.
execute
111