How To Read The Manual - Steinberg R 824 Getting Started Manual

How to Read the
Manual
Types and Contents
Getting Started (this book)
Read this manual when setting up the
device. After finishing the setup as
indicated in this manual, read the
Operation Manual.
Operation Manual (PDF file)
This manual provides instructions on
how to use the device and gives
detailed information on specific
functions. It is included in the TOOLS
for UR824 CD-ROM.
NOTE
For contents of the operation manual,
•
refer to the section "Contents of the
Operation Manual" (page 21).
To view PDF files, you will need to install
•
Adobe Reader on you computer. You
can download the latest Adobe Reader
at the following web site.
http://www.adobe.com
Conventions
Windows or Mac
When the procedures or explanations
are specific to only one of the
platforms, Windows or Mac, this is
properly indicated in the manual. When
the platforms do not appear,
procedures or explanations are for
both Windows and Mac.
Procedures
"  " appears on some procedures in
the manual. For example, the string
[Devices] [Device Setup]

Panel] indicates that you should
perform the procedures in the following
order.
1.
Click the [Devices] menu.
2.
Select the [Device Setup] option.
3.
Click the [Control Panel] button.
Keyboard Shortcuts
[Windows modifier key]/[Mac modifier
key]+[key] shows the shortcut keys.
For example, [Ctrl]/[command]+[Z]
means "press [Ctrl] under Windows or
[command] under Mac, then press
[Z]."
Different Cubase Programs
The phrase "Cubase series" applies to
all Cubase programs and versions
(except Cubase LE). If the instructions
are only for Cubase, "Cubase only"
appears in the manual.
Screens
This manual predominantly uses
screenshots of Windows. However,
Mac screenshots are used when
instructions of the function apply only
to the Mac.
UR824 Getting Started
Introduction
[Control

9