Table of Contents
Advertisement
7.
When installation has been
completed, click [Finish].
If a window requiring you to restart
your computer appears, follow the
on-screen instructions and restart
the computer.
Device Connection
8.
Connect the device directly to
the computer by using the
included USB cable.
Make sure to not connect it to a
USB hub.
9.
Turn on the device.
Windows XP:
The "Found New Hardware
Wizard" window appears. Go on to
step 10.
Windows Vista/Windows 7:
Go on to step 13.
10.
If the "Can Windows connect to
Windows Update to search for
software?" message appears in
the middle of the window, select
"No, not this time" then click
[Next].
11.
Confirm that the "Install the
software automatically" has
been selected then click [Next].
12.
When the installation has been
completed, click [Finish].
Confirmation of Installation
13.
Open the "Device Manager"
window as follows.
Windows XP:
[Start]
[Control Panel]
([Performance and Maintenance])
[System]
[Hardware] tab
[Device Manager]
Windows Vista/Windows 7:
[Start]
[Control Panel]
([Hardware and Sound])
Manager]
14.
Click on the [+] mark or [>] mark
next to "Sound, video and game
controllers."
15.
Confirm that the device name is
listed.
Installation of the TOOLS for UR824 is
now completed.
Mac
Installation
1.
Turn off the computer and
device.
2.
Disconnect all USB devices
other than the mouse and
keyboard from the computer.
3.
Start the computer and log in to
the Administrator account.
4.
Insert the TOOLS for UR824 CD-
ROM into the CD-ROM drive.
UR824 Getting Started
Setup
[Device
15
Advertisement
Table of Contents
