Steinberg R 824 Getting Started Manual page 18

Basic Operations
4.
Launch the Cubase series
program as follows.
Windows:
[Start] [All Programs]

[Steinberg (Cubase series)]
[(Cubase series)]
Mac:
[Macintosh HD]
[(Cubase series)]
5.
When the following window
appears while the Cubase series
program is launching, confirm
that the device is selected, then
click [OK].
The audio driver settings are now
completed.
For instructions on using Cubase
series programs, refer to the PDF
manual, available from [Help] in the
Cubase series menu. For instructions
on using the device, refer to the
Operation Manual.
Programs Other Than
Cubase Series
1.
Make sure that all applications
have been quit.
2.
Connect the device directly to
the computer by using the
included USB cable.
18 UR824 Getting Started


[Applications]
 
3.
Turn on the device.
4.
Launch the DAW software.
5.
Open the audio driver settings
window.
6.
Set the audio driver settings.
The audio driver settings are now
competed.
For instructions on using the DAW
software, refer to your particular DAW's
software manual. For instructions on
using the device, refer to the Operation
Manual.