Sonnet ENCORE/ZIF G3 Installation Manual page 71

En
3. The ZIF socket has a corner without a hole
(Figure 9). Align and lower the Encore card so
that position 1 on the Encore matches with the
corner of the ZIF socket without the hole. If
you encounter any resistance, raise the card
and check for bent pins; then, realign the
card over the socket and gently lower it
again. Be very careful! Broken pins are not
covered under warranty.
4. With light finger pressure, hold the Encore level
in the ZIF socket and lower the ZIF socket lever
by pressing down until the lever hooks under
the side tab on the ZIF socket (Figure 10).
Reattach Heatsink
Reattach the heatsink (Figure 11). Place the metal
latch along the indented center of the heatsink.
Secure the heatsink by attaching one end of the
metal latch to one of the small ZIF socket tabs.
Attach the other end of the metal latch; it will
snap into place on the ZIF socket tab.
Close Computer
1. Raise the support latch (Figure 12) and lock it
into place under the internal assembly.
corner without hole
Figure 9; Figura 9
ZIF socket
lever
Figure 10; Figura 10
latch
Figure 11; Figura 11
support latch
Figure 12; Figura 12
Encore/ZIF
card
ZIF socket
use light finger pressure
Encore/ZIF
card
ZIF socket tab
3-7