Sonnet ENCORE/ZIF G3 Installation Manual page 57

En
4. With light finger pressure, hold the Encore level
in the ZIF socket and lower the ZIF socket lever
by pressing down until the lever hooks under
the side tab on the ZIF socket (Figure 10).
Reattach Heatsink
Reattach the heatsink (Figure 11). Place the metal
latch along the indented center of the heatsink.
Secure the heatsink by attaching one end of the
metal latch to one of the small ZIF socket tabs.
Attach the other end of the metal latch; it will
snap into place on the ZIF socket tab.
Close Computer
1. Raise the cover back into place (Figure 12).
2. Return the computer to your computing area
and reconnect the power and peripheral
cables to the computer.
Turn On Computer
1. Turn on your Power Macintosh. Your newly
accelerated machine should boot as normal.
2. If you are installing an Encore/ZIF G4, see
Chapter 6, "Upgrading to Mac OS 9.x and a
G4" for information about enabling AltiVec
extensions in Mac OS and application software.
Support Note:
upgraded with a G4 processor in order to
take advantage of AltiVec-enhanced applications
and software.
Your computer must be
use light finger pressure
ZIF socket lever
Encore/ZIF
card
Figure 10; Figura 10
latch
ZIF socket tab
Figure 11; Figura 11
cover
Figure 12; Figura 12
2-8