Sonnet ENCORE/ZIF G3 Installation Manual page 31

En
3. Disconnect the main SCSI cable (Figure 9).
4. Disconnect the secondary SCSI cable
(Figure 10), located to the left hand side
of the logic board.
5. Carefully move the SCSI cables aside to reveal
the logic board power cable (Figure 11).
6. Disconnect the logic board power cable
(Figure 12).
main SCSI cable
Figure 9; Figura 9
secondary SCSI cable
Figure 10; Figura 10
logic board
power cable
SCSI cables
Figure 11; Figura 11
logic board
power cable
Figure 12; Figura 12
1-7