Http Port; Http User And Password; Configuration In Xml - Snom 4S Administrator's Manual

[
S N O M
and cause a proxy crash. Therefore, it is recommended to use the file
logging feature only in cases where you want to identify a problem on a
temporary basis.

HTTP port

The http port is used to contact the web server of the proxy.
If you can see the configuration page, you have found the right port.
However, sometimes you might want to change the port number to a
different value (e.g. to install the mailbox). In this case, enter the desired
port number here. The web client will not be able to contact the proxy
again, as it changes the http port right after this change. You need to re-
enter the port in the web browser.

HTTP User and Password

To protect the access to the web server, you can set up a user
name and a password for the web server. Remember that this provides
only basic security, as the content of the web page is transmitted without
encryption over the network and the passwords can easily monitored by
network specialists. However, it avoids that everybody can easily access
the proxy.

Configuration in XML

Because all configuration information is kept in XML file format,
you can easily retrieve the configuration information in this format.
Just click on the link at the bottom of the web page to see the general
configuration of the proxy. You can save this configuration in any file you
like. To upload the configuration from such a file, use the file selection
4 S P / R
R O X Y E G I S T R A R
M ]
A N U A L
snom technology AG • 61