Snom 4S Administrator's Manual page 26

[
S N O M
SIP_PROXY_OPTS variable is set to a value depending on the html port
that you specify. You can edit the file and modify the value.
The installation script will install a command rcsip-proxy. rcsip-
proxy start starts the proxy while rcsip-proxy stop terminates the proxy
process.
After the installation you should see that the proxy is running.
Open a web browser to see if the proxy is up and running. Reboot the
system and check whether the sip proxy was started automatically after
the reboot. You can then continue with the installation using the web
browser. Stop and restart the proxy with the rcsip-proxy command to
check whether the configuration has been saved.
To update a version, copy the latest tarball into the directory and
run the install script of the new version. It will automatically shut down
the old proxy and run the new one. This takes less than a second and all
registered users will be still registered.
However, ongoing calls will not be billed during this update period.
Depending on the used mode (B2BUA or proxy) ongoing calls might loose
their context and calls may drop.
26 • Installation
4 S P / R
R O X Y E G I S T R A R
M ]
A N U A L