Snom 4S Administrator's Manual page 22

[
S N O M
You can then select the location where the proxy's files will be put.
The installation program proposes a reasonable location but if you want
to you can change it. After this, the installation asks you for the location
where the registration information will be put. This directory needs
write access and will contain the information for registered users. The
installation program proposes a location relative to the proxy installation
directory, but it might be useful to specify a different location for this, e.g.
a temporary directory. It is important that the directory exists; the proxy
will not create this directory.
In the next step you can select the installation type. We
recommend using the Typical installation. If you select Minimal, the
documentation is not installed.
Before the installation finishes, you need to define on which ports
the proxy will operate. This is important because otherwise it will be hard
for you to find the right port.
The http port defines where the web server of the proxy can
be accessed. The default port for web servers is 80, and if you are not
running any other web services on the computer, port 80 is a good choice.
Figure 3-4: Services in Windows
22 • Installation
4 S P / R
R O X Y E G I S T R A R
M ]
A N U A L