Handset / Handsfree / Headset; Programmable Keys - Snom 200 Administrator's Manual

[ 2 0 0 A
S N O M

Handset / Handsfree / Headset

The snom 200 supports calls being made while using the handset
or the handsfree capability. During a call, it is possible to easily switch
between both modes by pressing the function key
If a headset is connected and the audio output is set to headset
("RJ Conn" or "Chinch"), the snom 200 will treat the headset as the output
device for calls. For using snom 200 in a call center environment, the
connected headset will be the default case for dealing with the phone.
The key is therefore used to accept incoming calls.
Key mapping:
Switch to handsfree mode and back.
Accept incoming calls while headset mode
is on.
Returns to the idle state.

Programmable Keys

The five programmable keys on snom 200 on the right beside
the number block are the programmable function keys, which have the
following options:
Line
§
Destination
§
Intercom
§
M
D M I N I S T R A T O R
V 3 . 0 0 ]
A N U A L
.
snom technology AG • 31
3