Summary of Contents for SIIG Digital to Analog Audio Converter
Page 1
Digital to Analog Audio Converter Quick Installation Guide Introduction The Digital to Analog Audio Converter allows you to convert digital audio to analog L/R stereo. Key Features and Benefits • Converts Coaxial or Toslink digital audio to analog L/R stereo output •...
Package Contents • Digital to Analog Audio Converter • Power adapter • Quick installation guide Layout Power LED Toslink Coaxial Figure 1: Input Power Jack RCA (R/L) Figure 2: Output...
Connect your A/V receiver or amplifier to the converter’s Output connectors using a R/L cable (not included). Connect the converter's power adapter. Turn on the A/V receiver or amplifier, then the audio source. The Digital to Analog Audio Converter is now ready to use.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.
Page 8
Fremont, CA 94538-3152, USA Phone: 510-657-8688 Digital to Analog Audio Converter is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the Digital to Analog Audio Converter and is the answer not in the manual?
Questions and answers