Fog Lamp Control (If Equipped); High Beams; Flash-To-Pass - Ford 2011 F-250 Owner's Manual

Lights
3. Turn the ignition switch to on and then back to off.
4. Turn the headlamp control to the autolamp position. The headlamps
will turn on.
5. Wait the desired amount of time for the exit delay you want (up to
three minutes), then turn the headlamps off.

Fog lamp control (if equipped)

The headlamp control also operates
the fog lamps. The fog lamps can be
turned on only when the headlamp
control is in the , or
position and the high beams are not
turned on.
Pull headlamp control towards you
to turn fog lamps on. The fog lamp
indicator light will illuminate.

High beams

Pull the lever fully (to second
detent) to activate. Pull the lever
again to deactivate.

Flash-to-pass

Pull toward you slightly to activate
and release to deactivate.
87
2011 F-250/350/450/550 (f23)
Owners Guide, 1st Printing
USA (fus)