Lights; Headlamp Control; Autolamp Control (If Equipped); Autolamps - Programmable Exit Delay - Ford 2011 F-250 Owner's Manual

Lights

HEADLAMP CONTROL

Rotate the headlamp control
clockwise to the first position
turn on the parking lamps.
Rotate clockwise to the second
position to also turn on the
headlamps.

Autolamp control (if equipped)

The autolamp system provides light
sensitive automatic on-off control of
the exterior lights normally
controlled by the headlamp control.
• To turn autolamps on, rotate the
control to .
• To turn autolamps off, rotate the
control from the autolamp
position.
Note: If the vehicle is equipped with autolamps, it will have the
headlamps on with windshield wipers feature. If the windshield
wipers are turned on, the exterior lamps will turn on with the headlamp
control in the autolamp position.
The autolamp system also keeps the lights on for a predetermined
amount of time after the ignition switch is turned to off. You can change
the amount of time the lamps stay on by using the programming
procedure that follows:

Autolamps - Programmable exit delay

Programmable exit delay allows the length of the autolamp exit delay to
be changed.
To program the auto lamp exit time delay:
1. Start with the ignition in the off position and the headlamp control in
the autolamp position.
2. Turn the headlamp control to off.
86
2011 F-250/350/450/550 (f23)
Owners Guide, 1st Printing
USA (fus)
to