Replacing Fog Lamp Bulbs (If Equipped); Replacing License Plate Lamp Bulbs; Replacing High-Mount Brake Lamp Assembly - Ford Focus 2008 Owner's Manual

Lights

Replacing fog lamp bulbs (if equipped)

1. Make sure the headlamp switch is
in the off position.
2. Reach under the front fender, and
remove the harness/bulb assembly
from the fog lamp by turning
counterclockwise.
3. Disconnect the harness from the
bulb by pulling it straight off.
Install the new bulb in reverse order.

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is
in the off position.
2. Remove the two screws and the
lens from the license plate lamp
assembly.
3. Carefully pull the bulb straight
out from the lamp assembly.
Install new bulb(s) in reverse order.

Replacing high-mount brake lamp assembly

Your vehicle is equipped with an LED center high-mount stop lamp. It is
designed to last the life of the vehicle. If replacement is required, it is
recommended that you see your authorized dealer.
43
2008 Focus (foc)
Owners Guide
USA (fus)