Replacing Fog Lamp Bulbs (If Equipped); Replacing High-Mount Brake Lamp Bulb; Replacing License Plate Lamp Bulbs - Ford 2011 Ranger Owner's Manual

Lights

Replacing fog lamp bulbs (if equipped)

1. Make sure the headlamp switch is
in the off position and remove the
bulb socket from the fog lamp by
turning it counterclockwise.
2. Disconnect the electrical
connector.
Install the new bulb in reverse
order.

Replacing high-mount brake lamp bulb

1. Make sure the headlamp switch is
in the off position and remove the
two screws and lamp assembly from
vehicle.
2. Remove the bulb socket from
lamp assembly by rotating it counterclockwise.
3. Carefully pull bulb straight out of socket.
Install the new bulb in reverse order.

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is
in the off position and reach behind
the rear bumper to locate the bulb
socket.
2. Twist the socket counterclockwise
and remove.
3. Carefully pull the bulb straight
out of the socket.
Install the new bulb(s) in reverse
order.
47
2011 Ranger (ran)
Owners Guide, 1st Printing
USA (fus)