Valcom V-1080 Flexhorn Instruction Manual

THREE WATT ONE-WAY PAGING HORN
INTRODUCTION
The Valcom V-1080 Flexhorn is a one-way
self-amplified paging horn designed to provide
voice paging as well as background music. This
horn is weatherproof and can be used indoors or
outside in environments ranging from -20 to
+55°C. A volume control is accessible on the
front of the cone. The horn is offered in gray,
beige and white.
Model V-1080-GY
Model V-1080-BG
Model V-1080-W
Dimensions/Weight
6.80"H x 8.30"W x 3.30"D
(17.27cm H x 21.08cm W x 8.38cm D)
2.1 lbs. (0.95 kg)
The V-1080 requires -24VDC, 150mA (3 Valcom
Power Units) and is FCC Part 68 Registered
under BAFUSA-69358-KX-N.
CONNECTIONS
Page
Out
Valcom Page
Control
NOTE: Do not connect this speaker directly to
a 25/70/100 Volt amplifier as damage to both
the amplifier and speaker may occur. A V-1095
can be used to provide an interface between a
centrally amplified speaker line and Valcom
self-amplified horns.
V-1080 FLEXHORN
Gray
Beige
White
(Tip/A) Green
One-Way
(Ring/B) Red
Amplified
(-24VDC) White
Speaker
(GND) Black
Valcom -24VDC
Power Supply
POWER WIRE RUN
# Horns per
Power Run
V-1080
(3 Watts)
5
2
1
MOUNTING INSTRUCTIONS
FLUSH MOUNT
Using the template packaged with the speaker,
draw the speaker outline on the wall to be cut.
Make appropriate wiring connections and test the
speaker for operation. Using appropriate
mounting screws (not furnished) drill and mount
the flange as shown.
UNIVERSAL BRACKET
Loosen or separate the universal bracket leaves
by loosening or removing the handle and
hardware. Using the back leaf as a template,
mark the wall through the mounting holes, drill
and mount to the wall using appropriate screws
(not furnished) or mount directly to a junction box.
1
Issue 4
Wire Run Length (feet)
24 AWG 22 AWG
250 400
500 800
760 1200
947780