Table of Contents
Advertisement
•
Data Terminal Ready (CT108-2/DTR),
•
Data Set Ready (CT107/DSR),
•
Data Carrier Detect (CT109/DCD),
•
Ring Indicator (CT125/RI).
FASTRACK
M1306B
RS232 interface has been designed to allow flexibility in the use of the serial interface
signals. However, the use of TX, RX, CTS and RTS signals is mandatory, which is not
the case for DTR, DSR, DCD and RI signals which can be not used.
7.3.2 Autobauding Mode
The autobauding mode allows the M1306B to detect the baud rate used by the DTE
connected to the RS232 serial link.
Autobauding mode is controlled by AT commands. See "AT Commands Interface
Guide" [7] for details on this function.
confidential ©
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement.
WM_PRJ_M13_UGD_001 -003
(DCE)
Figure 14: RS232 Serial Link signals
Fastrack M1306B User Guide
CT103 / TX
CT104 / RX
CT105 / RTS
DTE
CT106 / CTS
CT107 / DSR
CT108-2 / DTR
CT109 / DCD
CT125 / RI
Functional Description
Page: 43 / 65
November 11, 2006
Advertisement
Table of Contents
