Shure LX Wireless System User Manual page 14

ATTACHING THE LX1 TO A BELT OR GUITAR STRAP
Attach the LX1 body-pack transmitter clip to a belt, waistband, or guitar strap by de-
pressing the tab marked PRESS and slipping the belt or strap between the transmitter
body and the belt clip, as shown in Figure 11. The clip holds tightest if the material is
drawn to the clip's top wire (especially thinner guitar straps).
ATTACHING THE LX1 TO A BELT OR GUITAR STRAP
INSTALLING THE WA555 GRIP/SWITCH COVER ACCESSORY
ON THE LX2
The LX2 transmitter comes with an external sleeve accessory (WA555) that prevents
accidental movement of the microphone controls without affecting RF performance. It
also provides the microphone with a "grip" feel. To install the grip/switch cover, proceed
as follows:
INSTALLING THE OPTIONAL LX2 GRIP/SWITCH COVER ACCESSORY
Unscrew the battery cover.
Slide the cover over the microphone handle, "lip" end downward. The cover fits
snugly and requires additional pressure for the last inch of travel.
Reinstall the battery cover.
BELT OR GUITAR STRAP
FIGURE 12
WA55 GRIP/SWITCH
COVER
FIGURE 13
LX Wireless System
13