AMX RPMLoader Operation/Reference Manual page 19

FIG. 22
Search For Masters dialog - Select NetLinx Master To Add
An instance of the New TCP/IP Setting dialog will be presented for each of the selected Masters, to provide an
opportunity to enter a Description for each Master as well as to enter User Names and Passwords, if required
(FIG. 23):
FIG. 23 New TCP/IP Setting dialog
5.
Fill in the fields in the New TCP/IP Setting dialog and click OK to close the dialog and add the new
Master to the List of Masters in the Connect To Master dialog.
Do not change the Port number - it should remain set to 1319.
The selected Master is now present in the List of Masters in the Connect To Master dialog (FIG. 24).
FIG. 24 Connect To Master dialog - indicating newly added Master
If you have selected multiple Masters, then the New TCP/IP Setting dialogs will be
presented serially, in the order that the Masters were selected. Fill in the fields as
necessary and click OK to save changes and proceed to the next New TCP/IP
Setting dialog. This process will continue until each new Master has been added to
the Connect To Master dialog.
RPMLoader
Using RPMLoader
13