panja Black/White LCD Instruction Manual page 19

FIG. 2 Setup page
4. Press EDITOR to enable Edit mode. The EDITOR button is highlighted in the Protected Setup
page when enabled, as shown in FIG. 15.
FIG. 3 Protected Setup page with the active EDITOR button
5. Press EXIT to close the Protected Setup page and return to the Setup page (now in the Edit
mode).
6. Press EXIT again to return to the Main page. The EDIT button appears at the top of the page
indicating that Edit mode is active.
7. Press EDIT to open the Edit bar. The BUTTON and PAGE options, in the Edit bar, (FIG. 16)
are used to design and modify button and page settings.
FIG. 4 Main page with Edit bar
Black/White LCD Mini-Touch Panels
Designing Touch Panel Pages
Edit bar
15