Installing Touch Panels And A Bb-Mtp Back Box (Plasterboard) - panja Black/White LCD Instruction Manual

Installation

Installing touch panels and a BB-MTP Back Box (plasterboard)

The touch panel must always be installed with the release slot located at the bottom.
FIG. 4 shows the AXD-MLC/PB and BB-MTP UniMount Back Box for plasterboard.
BB-MTP Back Box
enclosure
Knockout
Expansion clip
FIG. 4 AXD-MLC/PB and BB-MTP Back Box (plasterboard)
1. Cut out the surface using the dimensions shown in FIG. 5.
FIG. 5 Decor-style (AXD) and BB-MTP cutout dimensions for plasterboard
6
Plasterboard surface
mounting flanges
Expansion clip
AXD-MLC/PB
faceplate
Engraved overlay
Black/White LCD Mini-Touch Panels