Table of Contents
Advertisement
Designing Touch Panel Pages
General Button Types (Cont.)
Status buttons
Operation bars
Touch to Continue buttons
Joystick buttons
Bargraph buttons
Activating Edit Mode
Before designing touch panel pages and buttons, you must activate EDIT mode. Use the EDIT
button to enter Edit mode. When powering up the touch panel, the first page is the Main page
(FIG. 13). Note that the Edit button is not available initially.
If you have a pre-programmed panel, you may not see the Main Page.
FIG. 1 Main Page
To activate edit mode:
1. Press SETUP in the Main page to open the Setup page (FIG. 14).
2. Press PROTECTED SETUP to open the keypad.
3. Enter 1988 (default password) in the keypad and press ENTER to open Protected Setup page.
If you press ENTER after typing an incorrect password, you are immediately returned to the
previous page.
14
Status buttons have no functionality except to display information.
Operation bars appear in the place of the Editor bar after you have
selected a button or page edit operation. The operation bar indicates
which edit function is currently active. When an edit operation is
selected, it remains active until you press EXIT.
"Touch to Continue" buttons appear when an operation requires user
acknowledgement.
Joysticks are vertical and horizontal direction controllers for use with
pan and tilt camera controllers.
Bargraph buttons display a dynamic bargraph (vertical or horizontal).
An example is the Batter level indicator button.
Black/White LCD Mini-Touch Panels
Advertisement
Table of Contents
