Wiring The Mini-Touch Panels - panja Black/White LCD Instruction Manual

Installation
4. Connect the AXlink wiring to the Central Controller. The AXW-MLC (/PB) beeps on power-
up.

Wiring the Mini-Touch Panels

The Mini-TiltScreens use a mini-XLR (male) connector (FIG. 6) for power and data
communications.
FIG. 6 AXT-MLC rear panel connectors
The Decor-style and rack-mount mini-touch panels use a 4-pin (male) AXlink connector for power
and data. FIG. 7 illustrates the location of the rear panel AXlink connector on the panels.
FIG. 7 AXD-MLC (/PB) and AXM-MLC (/PB) (top view)
FIG. 8 shows the AXlink connector on the AXW-MLC (/PB) mini-touch panel's circuit card.
AXlink
connector
Touch overlay
ribbon cable
connector
FIG. 8 AXW-MLC (/PB) circuit card connectors and ribbon cable
8
Mini-XLR 4-pin AXlink and
power connector
4-pin (male) AXlink connector
Backlight connector
Black/White LCD Mini-Touch Panels