Replacing High-Mount Brakelamp Bulbs; Replacing License Plate Lamp Bulbs - Ford 2004 Excursion Owner's Manual

Lights

Replacing high-mount brakelamp bulbs

1. Make sure the headlamp switch is
in the OFF position and remove the
two screws and then the lamp
assembly.
2. Remove the bulb socket from
lamp assembly and pull the bulb
straight out.
Install the new bulb(s) in reverse order.

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is
in the OFF position and reach
behind the rear bumper to locate
the bulb socket.
2. Twist the socket counterclockwise
and remove.
3. Pull the old bulb straight out.
Install the new bulb in reverse order.
56
2004 U137 Excursion (hdw)
Owners Guide (post-2002-fmt)
USA English (fus)