Replacing High-Mount Brakelamp Bulb; Replacing License Plate Lamp Bulbs - Ford 2008 Ranger Owner's Manual

Lights

Replacing high-mount brakelamp bulb

1. Make sure the headlamp switch is
in the OFF position and remove the
two screws and lamp assembly from
vehicle.
2. Remove the bulb socket from
lamp assembly by rotating it counterclockwise.
3. Carefully pull bulb straight out of socket.
Install the new bulb in reverse order.

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is
in the OFF position and reach
behind the rear bumper to locate
the bulb socket.
2. Twist the socket counterclockwise
and remove.
3. Carefully pull the bulb straight
out of the socket.
Install the new bulb(s) in reverse
order.
52
2008 Ranger (ran)
Owners Guide (post-2002-fmt)
USA (fus)