Energy Management Feature; Safety Belt Replacement Label - Ford 2004 Excursion Owner's Manual

After any vehicle collision, the safety belt systems at all outboard
seating positions (except the driver position, which doesn't have
this feature) must be checked by a qualified technician to verify that
the automatic locking retractor feature for child seats is still
functioning properly. In addition, all seat belts should be checked for
proper function.
BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if
the seat belt assembly "automatic locking retractor" feature or
any other seat belt function is not operating properly when checked
according to the procedures in Workshop Manual. Failure to replace
the belt and retractor assembly could increase the risk of injury in
collisions.

Energy Management Feature

• This vehicle has a seat belt system with an energy management
feature at the front outboard seating positions to help further reduce
the risk of injury in the event of a head-on collision.
• The front outboard seat belt systems have a retractor assembly that is
designed to pay out webbing in a controlled manner. This feature is
designed to help reduce the belt force acting on the occupant's chest.

Safety belt replacement label

The short plastic boot on the front
safety belt at the passenger
outboard anchor location covers a
"Replace Belt" label on the safety
belt.
2004 U137 Excursion (hdw)
Owners Guide (post-2002-fmt)
USA English (fus)
Seating and Safety Restraints
107