Alcatel-Lucent AOS-W 3.4 MIB Reference Manual page 93

wlsrChannelRateAnomaly
Objects
Status
Description
wlsrNodeRateAnomaly
Objects
Status
Description
wlsrEAPRateAnomaly
Objects
Status
Description
wlsrSignalAnomaly
Objects
Status
Description
wlsrSequenceNumberAnomaly
Objects
Status
Description
wlsrDisconnectStationAttack
Objects
Status
Description
AOS-W 3.4 MIB | Reference Guide
{wlsrFrameType, wlsrLocation, wlsrCurrentChannel}
current
This trap indicates that an AP/AM at wlsrLocation detected frames of type
wlsrFrameType on wlsrCurrentChannel which exceeds the configured IDS rate
threshold.
{wlsrFrameType, wlsrNodeMac, wlsrRSSI, wlsrLocation}
current
This trap indicates that an AP/AM at wlsrLocation detected frames of type
wlsrFrameType transmitted by node
IDS rate threshold.
{wlsrLocation, wlsrCurrentChannel}
current
This trap indicates that the number of EAP Handshake packets received by an AP/
AM at wlsrLocation exceeds the configured IDS EAP Handshake rate.
{wlsrLocation, wlsrCurrentChannel}
current
This trap indicates that an AP/AM at wlsrLocation detected a signal anomaly on
wlsrCurrentChannel.
{wlsrSourceMac, wlsrRSSI, wlsrLocation}
current
This trap indicates that an AP/AM at wlsrLocation received packets which exceeds
the acceptable sequence number difference. The acceptable sequence number
difference is an IDS Configuration object.
{wlsrFrameType, wlsrSourceMac, wlsrRSSI, wlsrLocation}
current
This trap indicates that an AP/AM detected a station disconnect attack.
wlsrNodeMac which exceeds the configured
AP and AM | 93