Wlsrtrapobjectsgroup; Table 20 Wlsrtrapsgroup Oids - Alcatel-Lucent AOS-W 3.4 MIB Reference Manual

wlsrAmMonitoredTime
Syntax
Max-Access
Status
Description
wlsrAmInactivityTime
Syntax
Max-Access
Status
Description
wlsrAmLoadBalancing
Syntax
Max-Access
Status
Description

wlsrTrapObjectsGroup

The objects of the wlsr Trap Objects group provide information about traps generated by access points.
The objects of this group do not support the commands GET or SET.

Table 20 wlsrTrapsGroup OIDs

Object
wlsrTargetApBSSID
wlsrTargetApSSID
wlsrTargetApChannel
wlsrSourceMac
wlsrNodeMac
wlsrFrameType
wlsrAddressType
wlsrSignatureName
wlsrMatchedMac
wlsrMatchedIp
wlsrReceiverMac
AOS-W 3.4 MIB | Reference Guide
TimeTicks
read-only
current
Time in ticks since the air monitor is observing this access point.
TimeTicks
read-only
current
Access point inactivity time.
Integer
enable(1)
disable(2)
read-only
current
The attributes indicates whether load balancing is enabled for this access point.
Object ID
1.3.6.1.4.1.14823.2.3.1.1.100.100.1
1.3.6.1.4.1.14823.2.3.1.1.100.100.2
1.3.6.1.4.1.14823.2.3.1.1.100.100.3
1.3.6.1.4.1.14823.2.3.1.1.100.100.4
1.3.6.1.4.1.14823.2.3.1.1.100.100.5
1.3.6.1.4.1.14823.2.3.1.1.100.100.6
1.3.6.1.4.1.14823.2.3.1.1.100.100.7
1.3.6.1.4.1.14823.2.3.1.1.100.100.8
1.3.6.1.4.1.14823.2.3.1.1.100.100.9
1.3.6.1.4.1.14823.2.3.1.1.100.100.10 wlsrTrapObjectsGroup 10
1.3.6.1.4.1.14823.2.3.1.1.100.100.11 wlsrTrapObjectsGroup 11
wlsrTrapObjectsGroup 1
wlsrTrapObjectsGroup 2
wlsrTrapObjectsGroup 3
wlsrTrapObjectsGroup 4
wlsrTrapObjectsGroup 5
wlsrTrapObjectsGroup 6
wlsrTrapObjectsGroup 7
wlsrTrapObjectsGroup 8
wlsrTrapObjectsGroup 9
AP and AM | 83