Figure 2 Cli Interface; Figure 3 Graphical User Interface - Alcatel-Lucent AOS-W 3.4 MIB Reference Manual

Figure 2 CLI Interface

Figure 3
interface and the available features vary by application.

Figure 3 Graphical User Interface

WLAN Health Information
This sections lists frequently used MIBs for system health checks. Examples of executing a command
via CLI are also provided. Health check information can be acquired through other MIB browsers, as
described in
.
Number of Current Authentications per AP
Number of Current APs per Switch
Number of Down APs per Switch
Number of Successful 802.1x Authentications
Number of Rogue APs per Switch—Count per
Building
Number of Interfering APs per Switch
Noise Level per AP
24 | Using MIBs
shows how information may be obtained through a graphical user interface ( GUI). The user
MIB Browsers on page 23
Frame Retry Rate per AP Channel
Frame Low-Speed Rate per AP Channel
Frame Receive Errors per AP Channel
Total Current Channel Bandwidth (kbps) per AP
Tx Packets per AP BSSID (32-bit counter)
Tx Bytes per AP BSSID (32-bit counter)
Rx Packets per AP BSSID (32-bit counter)
AOS-W 3.4 MIB | Reference Guide