The Signal Noise Ratio (SNR) module provides information about signal quality and packets. One value
of SNR is the signal quality during a sample period. The signal quality affects the quality of the
transmitted packets. The available SNR values include signal strength (total, maximum, minimum).
Additional information is the number of packets that were transmitted during the sample time.
Figure 13
(iso.org.dod.internet.private.enterprise.aruba). The SNR MIBs are listed in the file aruba-snr.my. For
information about downloading Aruba MIB files, see
Figure 13 SNR Hierarchy
AOS-W 3.4 MIB
| Reference Guide
shows the architecture of the SNR MIB relative to 1.3.6.1.4.1.14823
Aruba
Aruba Enterprise MIB Modules
Switch
wlsx Enterprise MIB Modules
wlsx SNR MIB
wlsx SNR Group
wlsx AP Snr Table
wlsx Sta Snr Table
wlsx AP Snr BSSID Table
wlsx Sta Snr Phy Table
Chapter 11
Signal Noise Ratio
Downloading MIB Files on page
1.3.6.1.4.1.14823
1.3.6.1.4.1.14823.2
1.3.6.1.4.1.14823.2.2
1.3.6.1.4.1.14823.2.2.1
1.3.6.1.4.1.14823.2.2.1.7
1.3.6.1.4.1.14823.2.2.1.7.1
23.
1.3.6.1.4.1.14823.2.2.1.7.1.1
1.3.6.1.4.1.14823.2.2.1.7.1.2
1.3.6.1.4.1.14823.2.2.1.7.1.3
1.3.6.1.4.1.14823.2.2.1.7.1.4
Signal Noise Ratio |
205