Alcatel 060320-10, Rev. B Configuration Manual page 230

Quick Steps for Configuring IPv6 PIM-DM
-> show ipv6 pim sparse
Status
Keepalive Period
Max RPs
Probe Time
Register Suppress Timeout
RP Switchover
SPT Status
The display for dense mode is similar to the one shown here:
-> show IPv6 pim dense
Status
Source Lifetime
State Refresh Interval
State Refresh Limit Interval = 0,
State Refresh TTL
(additional table output not shown)
For more information about these displays, see the "PIM Commands" chapter in the OmniSwitch CLI
Reference Guide.
page 6-34
= enabled,
= 210,
= 32,
= 5,
= 60,
= enabled,
= enabled,
= enabled,
= 210,
= 60,
= 16
OmniSwitch AOS Release 7 Advanced Routing Configuration Guide
Configuring PIM
March 2011