Alcatel 060320-10, Rev. B Configuration Manual page 160

Advanced routing configuration guide
Table of Contents

Advertisement

Configuring IPv6 Redistribution
Use the
show ipv6 redist
-> show ipv6 redist
Source
Destination
Protocol
Protocol
------------+------------+---------+--------------------
localIPv6
BGP
OSPFv3
RIPng
Configuring the Administrative Status of the Route Map Redistribution
To change the default administrative status of a route map redistribution configuration, use the status
parameter with the ipv6 redist command. For example, the following command disables the redistribu-
tion administrative status for the specified route map:
-> ipv6 redist ospf into bgp route-map ospf-to-bgp admin-state disable
The following command example enables the administrative status:
-> ipv6 redist ospf into bgp route-map ospf-to-bgp admin-state enable
Route Map Redistribution Example
The following example configures the redistribution of OSPFv3 routes into an IPv6 BGP network using a
route map (ospf-to-bgp) to filter specific routes:
-> ip route-map ospf-to-bgp sequence-number 10 action deny
-> ip route-map ospf-to-bgp sequence-number 10 match tag 5
-> ip route-map ospf-to-bgp sequence-number 10 match route-type external type2
-> ip route-map ospf-to-bgp sequence-number 20 action permit
-> ip route-map ospf-to-bgp sequence-number 20 match ipv6-interface intf_ospf
-> ip route-map ospf-to-bgp sequence-number 20 set metric 255
-> ip route-map ospf-to-bgp sequence-number 30 action permit
-> ip route-map ospf-to-bgp sequence-number 30 set tag 8
-> ipv6 redist ospf into bgp route-map ospf-to-bgp
The resulting ospf-to-bgp route map redistribution configuration does the following:
Denies the redistribution of Type 2 external OSPFv3 routes with a tag set to five.
Redistributes into IPv6 BGP all routes learned on the intf_ospf interface and sets the metric for such
routes to 255.
Redistributes into IPv6 BGP all other routes (those not processed by sequence 10 or 20) and sets the
tag for such routes to eight.
page 3-76
command to verify the redistribution configuration:
Status
Route Map
Enabled
ipv6rm
Enabled
ospf-to-rip
OmniSwitch AOS Release 7 Advanced Routing Configuration Guide
Configuring BGP
March 2011

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch aos 7

Table of Contents