Fan Headers; Memory Installation - Albatron PX925XE Series User Manual

FAN Headers

Three power headers are available for the cooling fans. Cooling fans play an important
role in maintaining the ambient temperature in your system.
Attention: We strongly recommend that you use a CPU
fan sink with your CPU. You can attach the power cable
from the CPU fan sink to the CPUFAN Header.

Memory Installation

These mainboards contain 4 memory slots which use 240-pin DDRII SDRAM with a total
memory capacity of up to 3.2~3.5 GB. You must install unbuffered/ non-ECC (or with ECC
for the PX925X series) DDR-SDRAM DIMMs with either 256 MB, 512 MB, or 1 GB of memory.
These modules must be either DDRII 400 or DDRII 533 SDRAM.
Attention: We strongly recommend that You have to install
modules in same specification to achieve the best effects. (Same
timing specifications and same DDR speed) lest the failure of
power-on or low memory speed if you install modules in
different type, different SPD (series presence detect).
PX925X/PX925XE Series
12