Table of Contents
Advertisement
■ Pan & Tilt
When a zoom image is displayed, touching
screen moves the image as shown below.
NOTES:
The image range of the zoom mode and wide mode differs. The
•
edge of wide image will not be displayed with the zoom mode.
At night, the image quality is degraded.
•
At night, the object image may be blurred and less-visible when
•
moving from right to left or up and down because illumination is
reduced. The same applies to a moving object.
If a CCTV camera is connected instead of a video door station at
entrance:
Zoom/Wide and Pan & Tilt functions are disabled.
Adjusting images [IMAGE]
While communicating with a door station, you can adjust the
screen brightness and viewability of images.
Adjustment can also be made while receiving a call from,
*
communicating with, or monitoring a video door station (when
MENU is displayed on the screen).
■ Adjusting screen brightness [
You can adjust the brightness of the screen in 10 levels.
1
Touch
MENU
IMAGE .
→
The setting window appears.
2
Touch
or
to change the level.
-
20
■ Adjusting viewability of images [ADJUST]
If the image on the screen is hard to see due to bright light,
,
, ,
on the
adjust settings.
NOTE:
This function is not available for an image from a CCTV camera.
Bright light conditions (Day)
1
2
NOTES:
•
•
]
When an image is displayed, touch
IMAGE .
The setting window appears.
Touch
ADJUST to select the desired adjustment
mode.
Backlight adjustment 1
.......Brightens the image.
Backlight adjustment 2
.......The background becomes darkened moderately.
Select this when the background is too bright.
No adjustment
.......Select this to restore default settings.
The discrimination between day and night is performed
automatically by the door station.
On the master station, you can preset an adjustment mode that
is automatically selected whenever starting displaying an image
during the day. This setting is also applied to all sub master
stations automatically.
MENU
→
Hide quick links:
Advertisement
Table of Contents
