Aiphone GT SYSTEM Installation Manual page 18

3-5 Entrance Station (Integrated type)
Flush mount
back box
Unit
Special
screwdriver
Mounting screws
×4
125 mm (4-15/16")
380 mm (15")
60 mm (2-3/8")
1
Open the cover and connect the wiring to the terminal block.
Insert the wire into the direct terminal. If it is difficult to insert the wire, insert it while
pressing the release button.
2
Close the cover until it clicks into place.
3
Mount the unit in the flush mount back box.
4
Tighten the locking screws using the special screwdriver.
- 18 -