W
XP
INDOWS
1.
Select Start -> My Network Places -> View network
connections.
2.
Double-click the Local Area Connection icon and click
Properties in the "Location Area Connection Status"
dialog box.
3.
If the Internet Protocol (TCP/IP) is not listed, click the
Install... button.
4.
In the "Select Network Component Type" dialog box,
select Protocol then click the Add... button.
5.
In the "Select Network Protocol" dialog box, select
Internet Protocol (TCP/IP).
6.
Click OK. The Windows XP installation CD-ROM may be
required.
7.
Follow the remaining dialog box prompts.
Once the protocol has been installed and configured in Windows,
the next step is to configure the TCP/IP parameters in the
network printer.
C
ONFIGURING THE NETWORK PRINTER
The Network Card Setup utility allows you to configure the
network printer IP address and to view the Printer Web Page.
L
AUNCHING THE
The following steps describe how to launch and install the
Network Card Setup utility:
1.
Ensure that the printer is switched on and connected to
the network.
2.
Insert the Software CD-ROM into the CD-ROM drive. The
Setup Utility starts automatically. If it does not start,
double-click \setup.exe (in the root directory) on the
CD-ROM.
3.
Select the appropriate language option and click I Agree
to accept the terms of the Software Licence Agreement.
N
C
S
ETWORK
ARD
Windows> 17
IP
ADDRESS
ETUP UTILITY