Table of Contents
Advertisement
8. Getting Your Device Connected and Synchronized
■ Connecting the Device to Other
Devices
You can connect your device to other compatible devices using
the following connections:
• Infrared connection
• Bluetooth connection
• USB connection
After a connection is established (except USB connection), you
can use the
Send as
commands in various application programs
to send data to or receive data from the connected devices.
Infrared Connection
Warning: Do not point the IR (infrared) beam at
anyone's eye or allow it to interfere with other IR
devices. This device is a Class 1 laser product.
1. Enable the infrared function of the device you want to
connect to. For more information, refer to the
documentation of that device.
2. Tap the
icon in the Main screen and then select
Infrared
on the
tab.
3. Select the Infrared status as
G e t t i n g Y o u r D e v i c e C o n n e c t e d a n d S y n c h r o n i z e d
PC connection
or Modem.
4. Set the Infrared function to be
5. Tap Done.
6. Align the infrared port of your device with that on the
device to be connected. Make sure that the distance in
between does not exceed 1 meter (1 m) and there is no
obstacles to obstruct transmission.
7. Now you can use the
Send as
program to send data, or receive data sent from the
connected device. When data is received, you will be
prompted to select
View
to save data to the specific location of the application
program.
USB Connection
1. Refer to the user guide on the CD to install and configure
the PC Suite for the Nokia 6708.
2. Make sure that your device is powered on and the
connection mode has been set to
cable" on page 45).
3. Connect the USB connector on the device to a USB port on
the PC using the supplied data cable.
On
or
On for 10
minutes.
command of the application
to view the received data, or
PC Connect
(See "USB
Done
93
Advertisement
Table of Contents
